单词盒子

bending strength

B 开头单词

基本解释

  • [力] 弯曲强度；[力] 抗弯强度

英汉例句

    双语例句

  • Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.
    考虑系统误差和轮齿综合柔度，对齿轮弯曲强度的计算力点进行研究。
  • Superhuman mental powers, including his extraordinary sense of hearing and blazing speed-reading, are as vital to Superman as his bullet-beating velocity and steel-bending strength.
    超人的精神超能力，包括他拥有的听觉超能力和阅读超能力，就像他拥有的可以躲避子弹的速度和折断钢铁的力量一样至关重要。
  • This paper delivered the relationships of uniaxial tensile and compressive stress with strain and bending properties, and felt-bending strength of cement mortar with polyvinyl acetate(PVAC).
    研究掺聚醋酸乙烯水泥砂浆的轴拉和轴压应力—应变关系、抗弯性能以及长期粘结抗弯强度。

    • 权威例句

  • These include their high strength, which makes it possible to create extremely rigid structures in terms of torsion and bending, excellent crash performance and low weight.
    ENGADGET: Visualized: Mercedes-Benz SLS AMG E-Cell bares all

词组短语

    短语

  • repeated bending stress strength 反复弯曲疲劳强度极限
  • bending ultimate strength 抗弯强度
  • bending tensile strength 抗弯拉强度
  • bending yield strength 弯屈服强度
  • bending endurance strength 弯曲疲劳强度

专业释义

    机械工程

  • 弯曲强度

    At high temperature, bending strength of TiC-Ni cermets decreased with temperature increasing and plastic distortion took place beyond 1000℃.
    随着温度的升高，TiC-Ni材料弯曲强度下降，温度超过1000℃开始发生塑性变形。

  • 抗弯强度

    Correspondingly, the wrapping materials have smaller effects on the tensile strength, and the species of the rattan cane have smaller effect on the bending strength.
    缠结材料对抗拉强度影响显著程度相对较小,基材对抗弯强度影响显著程度相对较小。

  • 齿根应力

    On the condition of knowing the root stress value of x-zero gear, the bending strength of x-gears with the same teeth can be calculated through the formula.
    在已知标准齿轮齿根应力值的前提下，通过该计算式便可算出任一变位下的齿根最大应力。

    化学

  • 抗弯强度

    The bulk density of this material is 2.71 g/cm3, the bending strength is 120MPa, the dielectric constant and the dielectric loss at 1MHz are 8.6 and 1.27×10-3 respectivly.
    烧结试样的体积密度为2.71g/cm3,抗弯强度为120MPa;在1MHz的测试频率下,其介电常数为8.6,介电损耗为1.27×10-3。

  • 弯曲强度

    Adding of LDPE causes the melt strength to grow but the stretching and bending strength to decrease.
    低密度聚乙烯用量增加时，熔体强度会有所上升，但力学性能会下降。 总的说来，熔体强度高的产物冲击强度较高，但拉伸强度和弯曲强度有下降的倾向。

  • 抗折强度

    At the same condition,the bending strength and bulk density of sample made of retotite were better than that of sample of kaolinite.
    ③在相同条件下，以累托石质配方制备的样品的抗折强度、体积密度大于以高岭土质配方制备的样品。

    能源科学技术

  • 抗折强度

    Comparison of the compressive and bending strength of set cement for different formulations and curing time, the use of early-strength agent ranging from 1.2% to1.8% can significantly improve the early-strength of set cement.
    通过对不同配方和不同养护时间的水泥石抗压、抗折强度实验对比得到:加入早强剂可以显著提高配方水泥石的早期强度,早强剂加量范围为1.2~1.8%之间。

    物理学

  • 挠曲强度
  • 抗折强度
  • 抗挠强度
  • 抗屈强度

    • 地球科学

  • 抗弯曲强度

    • 交通运输工程

  • 抗弯强度
  • 弯曲强度