corrosion products

基本解释

Because of the place obstruction of corrosion products in the surface of the alloys, while corrosion time is at 120 minutes above, the corrosion rate descends to the stable value in 48 hours.
当腐蚀浸泡的时间大于120分钟后，腐蚀产物在铝合金表面产生了明显的位阻作用，从而使腐蚀速率逐渐下降，直至48小时后，腐蚀速率趋于一相对稳定的数值。
Comments: When using diaphragm valves or any valve with a soft seat material in a service where corrosion products can be produced, it is very important to take precautions to prevent those reactions.
评论：当在可能产生腐蚀产物的设施处使用隔膜阀或任何带有软阀座材料的阀门时，采取防范措施来防止那些反应是非常重要的。
Corrosion products formed by these reactions can prevent normal valve operation and can become embedded in the elastomeric stem tip, preventing the valve from making a complete seal.
这些反应产生的腐蚀产物会阻止正常的阀门运转，深入到人造橡胶阀杆顶端，造成阀门不能完全密封。

腐蚀产物
The third stage is the corrosion products’ layer exists steadily with the progress of corrosion.
第三阶段,随腐蚀进行,腐蚀产物膜稳定存在阶段。
材料科学
腐蚀产物