flange

音标发音

Both flange and web exhibited satisfactory elongation characteristics ( i . e . 28 % ).
翼缘和腹板都有令人满意的延伸率 ( 即28% ).
Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹.
Small rectangular backup bars were used to fabricate the web - bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板.
For flange size backflow preventers installed vertically ( flow down ), a fabricated air gap is recommended.
对于垂直安装的法兰通径防回流阀, 则建议采用预制气隙.

a flat surface sticking out from an object, used to fix it to something or to make it stronger

A flange is a projecting edge on an object. Its purpose is to strengthen the object or to connect it to another object.

翼缘
In the beam-column joint zome, the column is bearing compression and tensile force. So the web may yield before the flange.
当柱与梁连接时,节点处柱受到压力和拉力作用,腹板受压区可能在翼缘未屈服前屈曲。
能源科学技术
法兰
During the stretching of thin wall cone parts, flange deformation area and cone walldeformation area are the main deformation areas.
二、薄壁锥形件拉深中法兰变形区、锥壁变形区是主要变形区。
机械工程
法兰
The transient sealing design method of the flange based on the tightness was put forward and programmed.
4.提出基于紧密度的法兰瞬态密封设计方法并编程实现。
翼缘
So the end-plate thickness should be equal to or more than the thickness of column flange, and the effect of tensile stiffener on bolts’distortion and column stability should be considered together.
因此建议在设计时适当增加端板的厚度,使其与柱翼缘厚度相近;对承拉加劲肋的设置应综合考虑其对螺栓变形及柱稳定性的影响。
凸缘